User manual

99
1/12 Octave + Tolerance
7
Run Indication
The run indication shows the measurement status running,
paused or stopped. Various measurement settings are
locked during ongoing measurements, such as changing
the input ranging or the preset measurement time.
For passed/failed measurements with the Spectral Limits
option the run indication may display A for a preset auto-
mated level trigger.
8
Actual Measurement Time
Counts actual measurement time in hrs:min:sec. Supports
setting of time modes: continuous and single.
Timer Mode Continuous
(applicable for standard measurements)
All values are recorded and monitored continu-
ously after starting a measurement with start
.
The actual measurement time is shown.
Timer Mode Single
Automatically stops the measurement after the
pre-set measurement time.
Set the required measurement time.•
Start the measurement •
.
9
Preset Measurement Time
Adjustment of preset measurement time for single timer
setting.
10
Broadband Results
User-selectable display of broadband results:
Broadband A A-weighted level
Broadband C C-weighted level
Broadband Z without any frequency weighting
- none
Sum of
bands
Sum of displayed frequency bands (only
available when #HideUnusedBands is
set to True within the tolerance file)