User manual
84
Reverberation Time RT60
Stop the Measurement and Read Out the Result
Press stop • .
If applicable, switch off the pink noise test signal.•
Select the result page • RES with page
.
The average reverberation time for each fre-
quency band is displayed in seconds and the
measurement uncertainty in %.
•
•
•
•
Read Out the Individual Cycle Result
If multiple cycles have been recorded, then select • CYC with
the rotary wheel
, press enter and select the individual
cycle result with the rotary wheel .
Within each cycle, the reverberation time for
each frequency band is displayed in seconds
and the correlation factor in %.
•
•
•
•
•
•
•
•
•
•
•
•
The RT60 reverberation time measurement is completed.