User manual

Sound Level Meter

How to Setup the XL2 for Triggered Event Measurements

Select the logging page, set• Logging On, Interval dt:

00:00:01 and choose the required log values.

Setup the event page. For example, the screenshot below •

starts the event recording after L

exceeds 80 dB for 2 sec-

onds and stops after L

is lower than 70 dB for 3 seconds.

Select the memory menu and create a new folder. This folder •

will then be displayed in the memory menu. All log data and

event wav-ﬁles are stored in this folder.

 The XL2 is ready for the triggered event measurement.

Logging Enabled

Triggered-event recording requires the activa-

tion of sound level logging. Using the default

Interval dt: 1 second is recommended.

Auto Save

If Log Audio

is set to Events Only, then

the XL2 sets per default Naming+Saving: auto

in the memory menu. This ensures that the re-

corded triggered event data is stored on the SD

Card.

For convenience, in case more than 20 triggered

events have been recorded, the Autosave ->

Delete function is disabled, as deleting such

multiple wav-ﬁles on the XL2 is time-consum-

ing.

Wav-ﬁles

All triggered-event wav-ﬁles are stored in an in-

dividual folder. For details see chapter Logging.