User manual

Sound Level Meter

Select Input Range

Select the lowest possible input range according to the maxi-•

mum level expected during the measurement. Wrong input

ranges are indicated by a < in front of the measurement val-

ue or a ﬂashing OVR message in the lower menu bar.

Select the input range • RNGE and press enter

Turn the rotary wheel • to set the applicable input range and

conﬁrm with enter

The numeric result page and the real-time ana-

lyzer page use the same input range.

Start RTA Measurement

The XL2 is ready to display the measured sound pressure •

levels L

ZFmax

and L

live

Press start •

The run indication switches to running . The actual sound

level L

ZFlive

and the maximum level L

AFmax

are displayed.

The parameter RUN , LOG (logging is enabled) or AUD (au-

dio recording is conﬁgured) ﬂashes in the memory menu.