User manual

303
Appendix
Configuration “Microphone Attached”
XL2-TA Sound Level Meter •
Hardware version: D2 and E0
-
Firmware version 4.21
-
Shroud MXA01
-
M2230 Measurement Microphone, consisting of•
Microphone Preamplifier MA220
-
Microphone Capsule MC230 or MC230A
-
Class 1 Sound Calibrator CAL200•
Optional•
Optional: Extended Acoustic Pack
-
NTi Audio Mains Power Adapter Exel Line
-
NTi Audio Windscreen, 50 mm
-
NTi Audio Windscreen, 90 mm
-
XL2 Input Keypad
-
There are no correction values required for
these configurations.
Configuration “Outdoor Microphone Detached”
XL2-TA Sound Level Meter •
Hardware version: D2 and E0
-
Firmware version 4.21
-
Shroud MXA01
-
M2230 Measurement Microphone, consisting of•
Microphone Preamplifier MA220
-
Microphone Capsule MC230 or MC230A
-
Weather Protection WP30 with bird spike BS01•
ASD Cable, 5 meter or 10 meter or 20 meter•
Class 1 Sound Calibrator CAL200•
Optional•
Optional: Extended Acoustic Pack
-
NTi Audio Mains Power Adapter Exel Line
-
XL2 Input Keypad
-
Dry Adapter MTG TA202 with Housing Extension WP30-X
-
There are no correction values required for •
the configuration “Outdoor Microphone De-
tached” at vertical noise incidents.
Activate the corresponding correction in the •
Calibration menu for “Outdoor Microphone
Detached” at horizontal noise incidents.