User manual

234
Further Information
SD Card Errors
The XL2 Audio and Acoustic Analyzer writes measurement
data automatically onto the SD Card during ongoing measure-
ments, thus a functioning SD Card has to be inserted at all
times.
Error Messages Actions to do
Missing SD-Card Insert the SD Card.
SD-Card is not FAT
formatted
Format the SD Card on the PC. Follow
the instructions at Formatting the SC
Card in this chapter.
SD-Card is full The memory of the SD Card is full.
Download all data to the PC and emp-
ty the SD Card.
Other Error Messages on Display
In case any other error message is shown on the XL2 display,
follow “Resetting to Factory Default” in this chapter. The XL2
should then be available for operation. If such errors occur fre-
quently, then kindly report the full error message back to NTi
Audio for resolution. Thank you.
Stored Data or Wav-files not available on SD Card
The file system might be corrupted.
On the PC, right-click on the “NTi Audio XL2” drive, select •
“Properties” and click “Check Now” as shown below.
Thereafter all stored data should be available again.•