User manual

203

Data Management

View Measurement Data

 The previously stored measurement data is displayed.

The run indication

shows the pause symbol.

You may continue with the measurements di-

rectly, e.g., choose the measurement function,

setup parameters and press start

Append Measurements

The append mode stores the results of several individual mea-

surements into the same data ﬁle, thus simplifying measure-

ment result analysis and data handling on the PC.

The following measurement functions support the append

mode:

SLMeter, sound level meter•

STIPA, speech intelligibility measurement•

Application example:

The sound level L

Aeq

shall be measured at various locations in

the same venue hall using a pink noise test signal. The append

mode allows to store all individual measurement results into

one single data ﬁle.

Backup the stored measurement data from the

XL2 to the PC daily. This prevents any data loss

if data has been deleted from the SD Card by

mistake.