User manual

197
Data Management
View Project Folder on the PC
Connect the XL2 with the USB cable to the PC.•
 The pop-up window USB Mode appears.
Select • Mass Storage and confirm with enter .
 The PC recognizes the XL2 as a mass storage device. The
following SD Card content is shown:
Open the folder “Projects” and the subfolder “MyProject”.•
 All stored measurement data files are shown.
If the XL2 is started with USB connection to PC,
then the COM port mode is automatically acti-
vated for remote measurement or the XL2 Pro-
jector PRO software. Therefore, if you want to
access the data in the SD Card, then first start
the XL2 and thereafter connect the USB cable
to the PC.