User manual

184
System Settings
10
Decimal Separator
Set the decimal separator to match the generated mea-
surement reports to the PC settings. This simplifies data
post-processing on the PC.
Navigate to the • Dec. Separator function
8
with the ro-
tary wheel
.
Toggle between “• . ” and “ , ” with enter
to set this
parameter.
 The decimal separator is set.
11
Calibration Menu Setting
Setting of the calibration menu.
Standard The default calibration menu is displayed.
Show
Spec.
Corr.
The calibration menu is extended by the se-
lection of the spectral correction for the out-
door measurement microphone M2230-WP
and the diffuse field correction. This setting
is required to activate the required correction
in the calibration menu.
Vibration
This page is available upon switching to the vibration menu,
which requires an installed Vibration-Option. Vibration is select-
ed in the calibration menu.
2
1
1
Selection Metrical-Imperial Units
Units selection
2
dB Reference
Definition of the reference parameters for dB results