User manual

183
System Settings
6
Show Profile List
You may configure the XL2 to start up with individual preset
application profiles. For example, sound level monitoring in
accordance with DIN 15905 or V-NISSG.
Yes T
he instrument starts up with default application
profiles.
Further details about the application pro-
files are in the chapter Profiles.
No The instrument starts up in the last configuration
without any application profiles.
7
Phantom Power
You can select if the phantom power should be activated or
disabled when the XL2 is powered up.
Off The
phantom power is switched off when
the XL2 is powered up; e.g. when it is
common to measure lines.
Remember The XL2 remembers the setting prior to
the last shutdown. (= default setting)
8
Speaker
Enables/disables the rear speaker. For example, it is recom-
mended that the rear speaker be disabled for all acoustic
measurements. This prevents measuring the audio feed-
back sound loop generated through the rear speaker.
9
USB Mode
This defines how the PC recognizes the connected XL2:
Ask on
connect
Select either the Mass storage or COM port
mode after connecting the XL2 to the PC.
Mass
storage
The PC recognizes the XL2 as a mass storage
device automatically, allowing you to down-
load XL2 measurement reports.
COM
port
The PC recognizes the XL2 as a COM port au-
tomatically for application of the XL2 Projector
PRO and the Remote Measurement Option.