User manual

151
Vibration Meter
1
Result Symbols / Capture & Start Tolerance Mode
This field offers two functions:
Symbols for measurement results •
2
Upper result displayed as line.
Lower result displayed as bargraph.
Capture & Start Tolerance Mode•
The displayed readings may be captured as reference
reading C1 to C8 for
Comparing measurement results against captured •
traces with relative or absolute curve display.
Creating tolerance masks based on captured refer-•
ence curves for passed / failed measurements.
Capture EQ Capt
ures the upper parameter
Capture Live Captures the lower parameter
Manage
captures
Allows to rename captures, clear re-
corded captures, save captures to the
SD Card for export from the XL2 or
load captures from the SD Card for im-
port to the XL2.
Start tolerance
mode
Starts the tolerance mode for passed/
failed measurements comparing the
actual measurement results against a
tolerance band.
2
Measurement Result
Actual level result of the indicated frequency band. The cur-
sor readout displays the center frequency and the level of
the band indicated by the arrow.
Upper parameter displayed as line.
Lower parameter displayed as bargraph.