User manual

143
Vibration Meter
Capture•
One of the displayed frequency band readings may be
captured. Any measurement data can then be compared
with this captured reference live on the XL2 Analyzer.
Select the parameter to be captured• .
Confirm with enter •
, to capture the reading.
Select the upper parameter •
15
and choose Capt.
Confirm with enter •
.
 The lower reading can be compared with the previously-
captured reference data.
5
Measurement Result
Actual level result of the indicated frequency band. The cur-
sor readout displays the center frequency and the level of
the band pointed to by the arrow.
Upper parameter displayed as line.
Lower parameter displayed as bargraph.
6
Y-Scale setting
Select the Y-Axis with the rotary wheel •
and confirm
with enter
.
Select the zoom factor between • 20, 10, 5, 2.5 dB/div and
confirm with enter
.
Scroll up and down with the rotary wheel • to select the
Y-axis range.
Confirm with enter •
.
7
Measurement Result
Real-time analyzer results in 1/1 octave or 1/3 octave band
resolution. Adjust the resolution at
17
.
8
X-Scale setting
Third-octave band resolution
2.5 Hz - 2.5 kHz CPB levels including wide band result
0.8 Hz - 1.0 kHz CPB levels including wide band result
0.8 Hz - 2.5 kHz CPB levels