User manual

STIPA

Enable Ambient Noise Correction

Select the correction page • Cor.

Turn the rotary wheel •

to select the parameter Ambient

Noise Correction and press enter

 The correction enables and the XL2 displays this screen:

You may adjust the ambient noise band levels

and the LAeq.

Commissioning New PA-Systems

New announcement systems are commissioned e.g. at public

areas prior the grand opening. Thus the actual ambient noise

caused by the public is not available yet during the speech in-

telligibility measurement. Here you may simulate the real-life

condition with ambient noise data enabled by one of the fol-

lowing modes:

Utilize a reference noise ﬁle, which might be applicable for •

the actual project

Measure the ambient noise at another similar project and

store this as reference noise ﬁle.

Back on the actual project select the parameter

- Load with

the rotary wheel

and press enter .

Select the reference noise ﬁle, which shall be utilized as -

ambient noise correction for your speech intelligibility

measurements.

Edit actual noise data•

Select the parameter

- Edit or the LAeq level with the ro-

tary wheel

and press enter .

Turn the rotary wheel to adjust the noise level. -

Press enter

- to continue the setting.

Skip the next step “Measure Ambient Noise” and go to “STI

Measurement”.