User manual

126
STIPA
Start Measurement
Press start • .
 The progress bar switches to RUNNING. The test result
tendency is shown on the bargraph, marked with Bad,
Poor, Fair, Good and Exlnt.
Stop Measurement and Data Saving
After the period of 15 seconds the speech intelligibility mea-
surement finishes automatically. The progress bar indications
switches to FINISHED and the final test result is displayed. The
measurement result is stored automatically.
Switch off the STIPA test signal.•
Press enter • to confirm. The measurement data is stored
on the SD Card in ASCII format.
 The measurement is completed.