User manual

101
1/12 Octave + Tolerance
14
Measurement Unit
Select the measurement unit as follows:
dB Sound level in dBSPL
This measurement unit is permanently selected
while an NTi Audio measurement microphone
with electronic data sheet is connected.
dBu Input level in dBu
dBV Input level in dBV
V Input level in Volt
Band Listening
The selected frequency band of the input signal
is audible on the rear speaker or at the head-
phone output.
Press and hold the speaker button •
down.
The pop-up window Volume is displayed.
Keep the speaker button •
pressed and
press enter at the same time.
 The band listening is activated.