Manual

Troubleshooting

5. TROUBLESHOOTING

SystemBreakDown

• Switch the device off.

• Reset the ML1 to the default status by pressing the ESC button

and switching the Minilyzer on simultaneously.

• Release the ESC button.

• The below screenshot, Fig 26, shall appear on the display, stating

on the bottom line LOADING DEFAULT SETUP.

• Verify the correct operation.

Fig 5.1

Start Up Screen Loading Default Setup

In case you nd system breakdowns happening several times or your

device is malfunctioning please contact the local NTi Audio representa-

tive in your country. For contact-details please see the NTi Audio web

page: "www.nti-audio.com".

LowLevelMeasurements

The Minilyzer does automatically

recognize the actual input (XLR

or RCA) in use. To measure low

level audio signals (< 70 dBu)

the balanced input shall be used

only. Unbalanced signals need

to be connected to the XLR-

input via an XLR/RCA-adapter.

Fig 5.2

XLR/RCA Adapter

Hot