User guide

Operation
26
Configurations
With the DR2, you can store your current instrument settings
as configurations, and recall these at a later date.
Storing configurations
10 configuration storage locations are available to you.
1. Using the rotary wheel, select CONFIG in the menu bar.
2. Confirm with “Enter”.
The following menu is opened:
3. Select STORE and confirm with “Enter”.
The following selection menu is opened:
Firmware
Displays the version number, with the possibility to carry out
a firmware update for the DR2
4
(see “Updating the Instru-
ment”).
Display of the serial number
You can read out the instrument’s serial number
5
from the
bottom line.
Setting the contrast
Changing the contrast of the screen display.
To do this, proceed as follows:
1. Hold down the “esc” button and turn the rotary wheel until
the desired contrast is obtained.
 You have now changed the contrast of the screen display.