User Manual

Reversible vibratory plate Operation Manual
page 20 issued 03/2016
10. The travel control lever will automatically shift forward and the machine begins to travel forward.
11. Shift the travel control lever backwards for reversing.
4.2. Diesel engines HATZ 1B30 and 1B50
1.
Set throttle to "idle".
2.
Starter cord slowly pull the handle stops and slowly release it back when you move it while holding
hands. Then pull the starter cord handle until you feel resistance, then grip the handle firmly with both
hands and pull sharply. The engine starts.
Starter cord handle drop sharply back. In retrospect, moving her hands to hold. (The procedure is
graphically illustrated starting the engine HATZ.)
If the machine is equipped electric start turn the key in the ignition (1), as shown, after the engine
starts release the ignition key. You can also start it manually (eg low battery). It is always necessary to
turn the ignition key to start position, otherwise you can not start the engine.
3.
Leave the motor full load while running at idle speed, to keep warm.
4.
Move throttle lever (1) to "full throttle". At about 1700 RPM centrifugal clutch automatically
switches and the machine begins to vibrate.
Forward travel
Reversing
1