User Manual

Reversible vibratory plate Operation Manual

page 19 issued 03/2016

5. Set up the throttle lever (1) into the “idle speed” position.

NOTE!!! Throttle lever (1) is to be set up only in two positions - “Idle speed” or “Full speed”.

Never set the throttle lever into intermediate positions, as that may lead to serious

damage of the centrifugal clutch.

6. Pull the grip of the recoil starter slightly until resistance is felt, then pull vehemently. The engine

would start up. Do not release the recoil rope, hold it and return it slowly into the original position.

7. Let the engine to warm up, and then return the choke lever back into the “OFF” position.

8. Let the engine to idle for a while to allow it to warm up before it is loaded.

9. Shift the throttle lever (1) into the “Full speed” position. At about 1700 RPM, the clutch engages

automatically and the machine begins to vibrate.