User Manual

Reversible vibratory plate Operation Manual
page 16 issued 03/2016
Unscrew the wing nut (1) and remove the filter element (2).
Remove the foam collar (3).
Check the paper filter element to make sure that it is clean and intact.
Clean the paper filter element carefully with compressed air, from inside only. Replace if too dirty.
Wash the foam collar in soap water, never in a solvent! Replace if damaged.
Refit all components carefully.
Never start or operate the engine with air filter removed. Dust and dirt sucked through the carburettor
into the engine would cause its rapid wearing.
Air filter for HATZ 1B30 and 1B50 engines:
Place the machine into a horizontal position and lift the hinged cover.
Unscrew the plastic wing nut (1) and remove the plastic air filter cover (2).
1
2
1
2
3
1
2