User Manual

Reversible vibratory plate Operation Manual
page 14 issued 03/2016
3.2. Inspection of Oil Level in Vibrator
Inspection of oil level in the vibrator is to be done once a year, within regular service inspection. We
recommend having this operation done by unauthorized service.
Place the machine on a level surface.
Unscrew the plug (1) to check the oil level in the vibrator. If correct, oil is slightly pouring out of the
hole. Refit the plug.
In case of low oil level, contact service organization.
Any repairs of vibrator within the warranty period by be carried out exclusively by authorized
service technician or the manufacturer; otherwise the manufacturer will not honour any possible
warranty claim.
NOTE!
Low or high oil level may lead to serious damage to the bearings in the vibrator.
3.3. Checking Fuel Level
Place the machine on a level surface and lift the tipping-off cover.
For gasoline engines, use gasoline with octane number 90 or more. We recommend unleaded gasoline
NATURAL 95.
In case of low fuel level, unscrew the fuel tank plug (1).
Top the fuel up to the edge of the filter. Refit the plug (1).
Never use gasoline mix with oil or dirty gasoline. Prevent to dust, dirt or water entering into the fuel
tank.
1
1