User's Manual

uniFLOW Release Station
23
o Session timeout
o Contact server on interval
o Language
 Port Configuration:
o The default ports configuration file is used.
 Network Configuration:
o Activate DHCP
The MiCard and MiCard Plus configuration is not covered by the factory reset.
12.5 Firmware Update
It is possible to update the firmware of the uniFLOW Release Station. To do so, you
first have to download the newest firmware .apk file. You can find the newest
firmware .apk file in the NT-ware Knowledgebase.
There are two ways to update the firmware of the uniFLOW Release Station:
Via USB drive:
1. Copy the downloaded .apk to the root folder of an USB drive formatted with FAT
or FAT32 file system.
2. Plug-in the USB drive while the uniFLOW Release Station app is running. The
uniFLOW Release Station will detect the USB drive mounting and read the first
.apk file it finds in the root folder.
3. A pop-up window appears asking you to install the application. Select Install.
4. After installation, select Open to start the new uniFLOW Release Station firmware.
Via web browser:
1. Open http://<uniFLOW_Release_Station>:8002/upgrade.htm in a browser to
access the Release Station - Upgrade web page.
2. Under Upload package, click the Browse button and select downloaded .apk file.
3. Click Upload & Install and wait until the web page displays sent.
4. A pop-up window appears asking you to install the application. Select Install.
5. After installation select Open to start the new uniFLOW Release Station firmware.
You can check the new version of the firmware by hitting the top bar of the screen to
open the About page. You can see the build version there.
Only official NT-ware signed .apk files can be used for the firmware update.