User's Manual

uniFLOW Release Station
17
 Software Version:
The current firmware version of the uniFLOW Release Station.
 Last ID (raw):
Shows the last read card number without code conversion (raw data).
This option is only displayed if Restrict HTTP Access to IP is set.
 Name:
You can change the default name of the uniFLOW Release Station for an easier
identification of the device itself, for example the name of the associated printer.
The name will also appear as Model name under the List view of the uniFLOW EAI
settings.
The preconfigured default name is "uniFLOW Release Station".
 Restrict HTTP Access to IP:
Only the computer with the IP address entered here is able to open the websites
of the uniFLOW Release Station. The uniFLOW Server will always have access to
the uniFLOW Release Station independent of the settings here. If left blank, there
is no access limitation.
 Session timeout (seconds):
Specify the time it takes for the uniFLOW Release Station to automatically log out
if a user has logged in and does not touch the screen and the device is not used.
 Contact server on interval (minutes):
Contacts the uniFLOW server on the given interval. It the uniFLOW Release Station
fails to reach the server 3 consecutive times, it displays the "Waiting for
Configuration" screen. This is disabled by default (0).
 Language:
Specify the language of the uniFLOW Release Station on-screen UI.
 Save & Reboot:
Saves the settings and restarts the uniFLOW Release Station to apply them.
A restart of the uniFLOW Release Station is necessary in order for the settings to be
applied. The login screen is updated once the language strings have been downloaded.