User's Manual

11
microMIND - Installation Guide
Update process:
Format your USB stick according to the requirements listed above.
Copy the MMAPP file onto the USB stick.
Detach your microMIND from the power supply. If PoE is used, detach the network
connection.
Attach the USB stick to the microMIND.
Attach the power supply. If PoE is used, attach the network connection.
Update proceedure:
LED Status:
1.
The device starts with the boot loader phase.
The microMIND checks if there is a USB stick with a
valid firmware connected to the device.
Power LED: off
Status LED: orange
2.
If there is no valid firmware found, the device starts
normally (step 3. and 4. are skipped)
3.
If there is a valid firmware found, it gets loaded.
4.
Once the firmware has been successfully and completely
loaded, the Status LED is flashing green.
Power LED: off
Status LED: green flashing
5.
Afterwards the microMIND starts its normal application.