User's Manual

10
microMIND - Installation Guide
The microMINDs IP configuration can be found by selecting a microMIND via mouse click
on the IP address. You’ll find the serial number of the respective microMIND on a sticker on
the back of the microMIND. A browser screen will open to configure the microMINDs IP
address.
By default the microMIND is set to DHCP, meaning that the microMIND receives it's
configuration from the companies DHCP server if available.
If there is no DHCP server available or if a DHCP server doesn't send any IP configuration
to the microMIND, the microMIND will appear on the MIND & microMIND / List view
page as well. This is because the microMINDs vendor MAC address portion is known to
the uniFLOW Server.
After all settings have been made, confirm the settings by clicking on Save Settings.
The rebooting process of the microMIND takes a few seconds.
2.8
Firmware update
The microMINDs firmware can be updated with a normal USB stick.
Requirements:
USB stick formatted with FAT and a sector size of 512 bytes.
New firmware with the file name MMAPP (note that the file name has no extension).