User's Manual

6
microMIND - Installation Guide
2.2
Scope of supply
The microMIND package includes
the microMIND device
a short patch cable to connect the device to a printer
Power supply (if no PoE microMIND)
a Quick Installation Guide
2.3
Technical Specifications
Power Supply:
The microMIND is available in two different versions. One with
PoE (Power over Ethernet) and one without. If you have a
microMIND which doesn't support PoE or if your network switch
doesn't support PoE, you have to use the respective power
supply. If you have purchased the device without PoE support,
the power supply is delivered with the device.
Rated Voltage:
12 V LPS
Ethernet:
2x RJ-45 Ethernet connection with a build in 10/100MBit switch
USB:
USB Type A connection with USB 1.1 (Full-Speed) to connect a
MiCard (V2) reader
Ambient
temperature:
0 … +40 °C (32 … +104 °F)
Printer:
Any printer with or without a respective network interface can be
connected to the uniFLOW Server. Printers without network
connections, such as USB or LPT connections, can also be
"virtually" attached to the microMIND via the uniFLOW Server.
Supported Readers:
MiCard (V1) and MiCard V2
uniFLOW:
uniFLOW and/or RPS V5.x or higher
Status LEDs:
The microMIND is equipped with colored status LEDs .
Note that the MiCard (V2) readers are the only readers supported by the
microMIND. Do not attach different readers or USB devices to the microMIND.
8