User's Manual

MiCard V3 Installation Manual (Full Install Guide)
3
Rated Voltage:
5 V LPS
USB:
1.1 (Full-Speed) or 2.0 (Hi-Speed
Ambient Temperature:
0 … +50 °C (23 … +122 °F)
Canon Device:
 Has to be a Canon MEAP enabled
MFP
 USB Application Interface board of
the respective Canon iR or Canon
imageRUNNER ADVANCE
 uniFLOW Login Manager/MomClient
(Secure/Public Printing Applet) V2.1.0
onwards (V2.4.0 recommended)
uniFLOW:
uniFLOW OM / uniFLOW and / or RPS V4.0.5
or higher
The MiCard V3 is supported by every MiCard supported MEAP version. Note that the
extended configuration of the MiCard V3 is only possible with MEAP applets from
V2.4.0 onwards.
Important Note:
Changes and/or modifications of the MiCard not approved by NT-ware
Systemprogrammierung GmbH will make void the user’s authority to operate the
MiCard.