User's Manual

MiCard V3 Installation Manual (Full Install Guide)
17
By clicking on this second icon a window opens in which you can set up a specific
MiCard V3 configuration.
The device specific parameters are the same as for the Global MiCard V3 Configuration
(on page 14). You can enable your device specific settings by changing the parameter
Use Specific MiCard V3 Config to Yes. The device specific settings will become active
by clicking the Save button. Now, the specific MiCard V3 configuration takes priority
over the global MiCard V3 configuration.
It is very important that you enter each parameter which is necessary to read out the
cards correctly. No default parameter will be taken over if a parameter field has not
been filled out. This means, if you change the beeper settings for example, you also
have to enter the Multi configuration, even if they are the same as in the Global
MiCard V3 configuration. Summarized one can say that if you have already entered a
global configuration, these settings will not be taken over for the device specific
settings.