User's Manual

MiCard V3 Installation Manual (Full Install Guide)
16
Search String
Enter a string to search for, to find the sector containing the user ID.
Auto Logoff when Card gone
-factory default- (No)
No
Yes - If this parameter is set to Yes, the contactless card must lie on the card reader as
long as the user is using the device. When the card is removed from the reader, the
user is logged off automatically.
Data Length
This value defines the length of the data that has to be read from the Legic card. Enter
a value between 0 and 255 (one Byte).
CRC Type
The CRC Type defines which kind of checksum is used on the Legic card. You can
choose either CRC 8Bit, CRC 16Bit or none. The factory default value is none.
3.1.3 Device Specific MiCard V3 Configuration
If a MiCard V3 is attached to the machine, the ID Device column on the MEAP &
miniMIND Status page contains a second icon as can be seen in the following
screenshot.