User's Manual

MiCard V3 Installation Manual (Full Install Guide)
10
If a Facility Code has been detected as invalid.
3 x fast
2 Configuration
The MiCard device works without any additional configuration, however, some
"advanced" options are available.
When using uniFLOW OM V3.1.1 or higher you can see the connected MiCard readers
on the MEAP/miniMIND Status tab (or List view tab for uniFLOW V5.x) of the main
menu Connections.
By clicking on in the ID-Device column, a new window will open showing you the
advanced options. If you are using a uniFLOW version older than uniFLOW OM V3.1.1,
you won’t see the connected MiCard readers in the status overview, but you can open
the configuration page using this URL:
http://<mfp-ip>:8000/usbidmodule/base.htm
Replace the term 'MFP-IP' between the brackets with the IP number of your printing
device.