User's Manual

MiCard V3 Installation Manual (Full Install Guide)
8
 Plug in the USB cable (USB sign facing the back of the device, i.e. not towards you)
and close the cover.
 Screw in the cover screw.
 Slide the control panel back into its original position.
 When all covers are closed, you can switch on the device. The machine and the
card reader will boot up. During the boot up process of the card reader, the red
LED of the MiCard V3 should flash. See the chapter on LED Status (on page 9) for
more information about the different LED colors and their status descriptions.
Other imageRUNNER ADVANCE models: