User's Manual

MiCard V3 Installation Manual (Full Install Guide)
7
 Detach the surface cover of the reader cover to mount the hook-and-loop
fastener.
 Attach the hook-and-loop fastener as can be seen in these pictures.
 Attach the surface cover to the reader cover and screw in the cover screws.
 Assemble the MiCard V3 as can be seen in the next picture. It is important that
you assemble the device like that, otherwise the LEDs of the MiCard V3 will not
shine through the half transparent cover of the card reader case. Ensure the USB
cable doesn't cover the mounting clip of the reader cover. Tighten the
hook-and-loop fastener.