User's Manual

14
3.2 Requirements for magnetic cards
Rating: 5 V
USB 1.1 Full Speed
Ambient temperature 0 … +50 ° C
Canon iR
- has to be MEAP enabled
- USB Application Interface board of the respective iR
- uniFLOW OM Login Manager/MomClient (Secure/Public Printing Applet) v2.1.3
uniFLOW OM:
- uniFLOW OM / RPS v3.1 required /
uniFLOW OM / RPS v3.1.1. recommended
3.3 System Setup for MiCard Magnetic Card Reader
· Connect the Magnetic Card Reader to the USB Host Connection of the MFP (See
photo below. Please be aware that the order of the USB connection may vary
depending on the model of the copier).
The power supply for the MiCard® reader is provided via the USB connection.
· A proper USB connection and a sufficient power supply of the MiCard® Magnetic
Card Reader is indicated by a lighted LED and a beep.