Computer Hardware User Manual

Using the CR8e
Main Menu
44
1 To view the current enclosure configuration, access the Main menu and
choose Hardware Menu.
2 Use the up/down arrow buttons to select Configuration Info and press the
Enter button.
3 Use the up/down arrow buttons scrolling to view the current configuration.
4 Press the Escape button to return to the previous menu or the Menu button to
return to the Main “Status OK” screen.
POST Results
This screen provides a list of the diagnostics performed during the POST procedure.
If an error has occurred it will be displayed here in addition to the notification
provided by the LEDs and alarms, see Power-On Self Test on page 37.
MENU ENTER ESCAPE
INTERNAL TEMP
COMPONENT STATUS
CONFIGURATION INFO
POST RESULTS
nStor
MENU ENTER ESCAPE
SLOT 2 CARD:
SLOT 1 CARD:
I/O INTERFACE
nStor
PROD: CR8L SAF-TE
MENU ENTER ESCAPE
RAM REVISION: 0.23
ROM REVISION: 1.05
ID: FFFFFFFFh
I/O INTERFACE
nStor
MENU ENTER ESCAPE
RAM CHKSUM ..FAILED
RAM R/W. ......OK
SCSI BUS 0 ...OK
ROM CHKSUM ..OK
nStor
MENU ENTER ESCAPE
POWER STATUS
FW REVISION
POST RESULTS
COMPONENT STATUS
nStor
MENU ENTER ESCAPE
SCSI BUS 1 ....OK
PROCESSOR.....OK
RAM R/W. ......OK
SCSI BUS 0 ....OK
nStor