Cut Sheet

Splicing
111 NSi
HEAVY WALL WITH SEALANT – DIRECT BURIAL & SUBMERSIBLE
HEAVY WALL HEAT SHRINK WITH SEALANT
–
FOR DIRECT BURIAL AND SUBMERSIBLE APPLICATIONS
Made of specially formulated polyolefin, which
is irradiated and thermally stabilized to give the
material an “elastic memory”. When a proper
amount of heat is directly applied to the shrink
sleeve, it will permanently shrink to its original
unexpanded diameter. The characteristics of
these sleeves are such that they will shrink to
tightly cover, and in a sense “mold” themselves
into irregular shapes. The interior of the sleeve
is coated with an adhesive that assures a
watertight seal after shrinking. Recommended for
installation on applications of up to 1,000 volts.
Shrinking temperature is 250-275°F.
For use on standard poly- or elastomeric-
ÃÕ>Ìi`É>ViÌi`ÊV>LiÃÊÀÊi>`>ViÌi`Ê
cables, which may include aluminum or steel
armoring.
UL recognized per UL486D, CSA C22.2,
ANSI C119.1-1986. RUS accepted for use as a
secondary tap or splice cover. May be used for
>ViÌÊÀi«>ÀÊÊV>LiÃÊÕ«ÊÌÊÎxÊ6°
Heavy wall heat shrink is also available
without sealant. Medium wall heat shrink and
flame retardant heavy wall heat shrink also
available, with or without sealant (not UL Listed).
Please contact NSi for price and delivery.
Connectors up to 6 inches:
recommended cut length = connector length + 4 inches.
Connectors over 6 inches:
recommended cut length = connector length + 5 inches.
CATALOG
NO.
UPC
CODE
CABLE SPLICE
RANGE
GENERAL USE RANGE (INCHES)
MAXIMUM MINIMUM
LENGTH
(INCHES)
NOMINAL
RECOVERED
WALL THICKNESS
HWHS 300-6 01172 8-14 AWG .30 .15 6 .079
HWHS 300-12 01173 8-14 AWG .30 .15 12 .079
HWHS 300-48 01174 8-14 AWG .30 .15 48 .079
HWHS 400-6 01150 6-12 AWG .45 .20 6 .090
HWHS 400-12 01193 6-12 AWG .45 .20 12 .090
HWHS 400-48 01151 6-12 AWG .45 .20 48 .090
HWHS 750-4 01175 2-8 AWG .70 .25 4 .090
HWHS 750-6 01152 2-8 AWG .70 .25 6 .090
HWHS 750-9 01176 2-8 AWG .70 .25 9 .090
HWHS 750-12 01153 2-8 AWG .70 .25 12 .090
HWHS 750-48 01154 2-8 AWG .70 .25 48 .090
HWHS 110-4 01186 4/0-4 AWG 1.20 .35 4 .120
HWHS 110-6 01168 4/0-4 AWG 1.20 .35 6 .120
HWHS 110-8 01177 4/0-4 AWG 1.20 .35 8 .120
HWHS 110-9 01155 4/0-4 AWG 1.20 .35 9 .120
HWHS 110-12 01156 4/0-4 AWG 1.20 .35 12 .120
HWHS 110-48 01157 4/0-4 AWG 1.20 .35 48 .120
HWHS 150-6 01178
400 MCM-1/0 A
WG 1.55 .50 6 .160
HWHS 150-9 01158 400 MCM-1/0 AWG 1.55 .50 9 .160
HWHS 150-12 01159 400 MCM-1/0 AWG 1.55 .50 12 .160
HWHS 150-48 01160 400 MCM-1/0 AWG 1.55 .50 48 .160
HWHS 200-6 01179 500-250 MCM 1.75 .70 6 .160
HWHS 200-9 01161 500-250 MCM 1.75 .70 9 .160
HWHS 200-12 01162 500-250 MCM 1.75 .70 12 .160
HWHS 200-48 01163 500-250 MCM 1.75 .70 48 .160
HWHS 268-9 01164 1000-400 MCM 2.45 .90 9 .160
HWHS 268-12 01165 1000-400 MCM 2.45 .90 12 .160
HWHS 268-48 01166 1000-400 MCM 2.45 .90 48 .160
HWHS 370-12* 01191 1250-800 MCM 3.70 1.30 12 .169
HWHS 370-48* 01192 1250-800 MCM 3.70 1.30 48 .169
HWHS 420-12* 01193 2500-1500 MCM 4.20 1.60 12 .169
HWHS 420-48* 01194 2500-1500 MCM 4.20 1.60 48 .169
* Not UL Listed