Cut Sheet

Splicing
117 NSi
THIN WALL AND HEAVY WALL HEAT SHRINK KITS/END CAPS
Heat-shrinkable end caps provide for efficient and
positive cable end sealing. Made of thermally
stabilized polyolefin, the interior of the HSC
is coated with a meltable sealant to assure a
watertight seal, complete insulation, abrasion and
corrosion resistance. Seals may be affected over
lead, steel, aluminum, copper and all standard
plastic and elastomeric insulating materials and
conduit. These caps replace greases, tapes, epoxy,
encapsulation, or dips. In most sizes, installation
may be accomplished in less than one minute.
HSC end sealing caps are qualified to ANSI
C119.1-1986 and rated to ICEA electrical
withstand test for 1,000 volts. HSC end sealing caps
can be used as a live seal for cables carrying up to
1,000 volts. They can also be used as end seals for
storing and pulling de-energized cable.
CAT.
NO.
UPC
CODE
CONDUCTOR
SIZE
PRIMARY INSULATION (1,000V)
USE RANGE (INCHES)
MAXIMUM MINIMUM
GENERAL USE RANGE
RECOVERED (INCHES)
MAXIMUM MINIMUM
HSC-30 01464 #12 – #8 AWG .35 .17 .30 .15
HSC-70 01465 #6 – 3/0 AWG .71 .31 .70 .30
HSC-125 01466 4/0 AWG – 750 mcm 1.25 .65 1.25 .65
HSC-195 01467 750 – 1500 mcm 1.94 1.08 1.95 1.05
HSC-265 01468 1500 – 2000 mcm 2.58 1.38 2.65 1.30
HSC-370 01469 3.54 1.94 3.70 1.85
HSC-450 01470 4.25 3.02 4.50 2.95
These kits have been carefully constructed to
include the most common sizes and types in their
category. The cases are made of extremely durable
polypropylene and have heat sealed hinges. They
provide the ultimate in organization and conve-
nience. Clearly labeled on the inside lid for easy
recognition. Convenient size for easy carrying
and easy storing.
DESCRIPTION
CATALOG
NO.
UPC
CODE
BAG CONTAINS
UPC
CODE
CARTON
QTY.
QTY. CAT.NO.
For details regarding heavy wall heat shrink,
see page 111
HSB-400 01180 6 HWHS 400-6 01150 10
HSB-750 01181 6 HWHS 750-6 01152 10
HSB-110 01182 6 HWHS 110-9 01155 10
HSB-150 01183 4 HWHS 150-9 01158 10
HSB-200 01184 3 HWHS 200-12 01162 10
HSB-M 01185 1 HWHS 400-6 01150 combo pack
THIN WALL HEAT SHRINK KITS
HEAVY WALL HEAT SHRINK DISPLAY BAGS
HEAVY WALL HEAT SHRINK KITS (WITH SEALANT)
HEAT-SHRINKABLE END CAPS
DESCRIPTION
CATALOG
NO.
UPC
CODE
KIT CONTAINS
QTY. CAT.NO.
CARTON
QUANTITY
SHPG. WT.
LBS. EA
Contains the six most common sizes of thin
wall heat shrink in 6” lengths. 2:1 shrink
ratio. Used for electrical insulation, wire
harness bundling, splices and terminations.
600 volt rated.
THK 01171 25 TWHS-125-6 8 2
25 TWHS-187-6
20 TWHS-250-6
12 TWHS-375-6
7 TWHS-500-6
5 TWHS-750-6
DESCRIPTION
CATALOG
NO.
UPC
CODE
KIT CONTAINS
QTY. CAT.NO.
CARTON
QUANTITY
SHPG. WT.
LBS. EA
Contains the four most common sizes of heavy
wall heat shrink in 6” lengths. 3:1 shrink ratio.
Interior is coated with an adhesive which ensures
a watertight seal after shrinking. Recommended
for almost all applications where tough
mechanical protection and a watertight seal
are required. 600 volt rated.
HHK 01170 8 HWHS-400-6 8 2
4 HWHS-750-6
4 HWHS-110-6
2 HWHS-150-6