Manual

6
Follow the same procedures above to set the second
signal or duty cycle entries.
Press MODE key to advance to next screen.
6.0 SCHEDULE SET MODE
Press MODE key until display shows:
6.1 SETTING HOURS, MINUTES, AND DAYS
Note: A schedule is needed for each event. If a typical
ON/OFF pair is required, use SCH 01 for the ON
event and SCH 02 for the OFF event.
Press the HOUR, and MIN keys to set the desired time.
Press EVENT to set desired event
(ON or OFF, C1, or C2)
Note: C1 or C2 will not be displayed if the duty cycle
durations are not set in Step 5.
Press DAY to set desired day(s).
Note: With each DAY button push a different group of
days will appear.