Manual

4
Now press MONTH and DATE buttons to modify the
starting DST settings. Pressing D AY changes default
day. EXAMPLE: A screen showing “04:01 SU S”
represents April (04), the first week (01), Sunday (SU),
and the Start (S) of daylight savings time.
Press ENTER to save and the display will show:
Now press MONTH and DATE buttons to modify the
ending DST settings. Pressing DAY changes default
day. EXAMPLE: A screen showing “10: L SU E”
represents October (10), the Last week (L), Sunday
(SU), and the End (E) of daylight savings time.
Press ENTER to save and the display will show the
modified DSt starting date.
Press MODE twice to go to step 5.0.
5.0 DUTY CYCLE AND SIGNAL
The Duty Cycle programming mode begins with a
display that shows the ON duration first for Duty Cycle
1 and the OFF duration second. Programming both
ON and OFF will enable the load to repeatedly turn
ON then OFF.
The Signal Timer operation can be used by setting only