Manual

9
daylight savings dates noted by ON. To remove
daylight savings time setting, press DEL to
change screen to show OFF. DST may be activated
again by pressing DEL. Press ENTER to save
changes. To change from the standard DST month/
week/day setting press HOUR and refer to step 4.1.
6. CYCLE MODE: To change duty cycle timing, press
either the HOUR, MIN, or SEC keys. Press ENTER to
save changes.
7. SCH MODE: To change schedule, press ENTER to
advance to desired event. Press HOUR, MIN, EVENT,
and DAY to modify time settings. Press DEL to delete.
Press ENTER after each modification to save changes.
NOTES:
1. Unit has a look back feature. Press the EVENT key
once to activate current schedule then EVENT
key again to return to the time (run) screen. Unit will
automatically pick up the last schedule.
2. To clear date and time only and provide unit with
a soft reboot, press and release the reset button that is
recessed under the small hole to right side of LCD
screen.
3. Clear all memory. To clear all memory, while in the
RUN mode, press ENTER, display will show:
Use the EVENT key to display:
Now Press ENTER briefly and everything in the timer
memory is cleared and 12HOUR will flash.