User Manual

Follow the same procedures above to set the second

signal or duty cycle entries.

Press MODE key to advance to next screen.

6.0 SCHEDULE SET MODE

Press MODE key until display shows:

6.1 SETTING HOURS AND MINUTES

Note: A schedule is needed for each event. If a typical

ON/OFF pair is required, use SCH 01 for the ON

event and SCH 02 for the OFF event.

Press the HOUR, and MIN keys to set the desired time.

Press EVENT to set desired event

(ON or OFF, C1, or C2)

Note: C1 or C2 will not be displayed if the duty cycle

durations are not set in Step 5.

Press CH SELECT key to select channel on

DG280A.