User Manual

Now press ENTER brieﬂy and everything in the timer

memory is wiped off including real time, date and

12HOUR will ﬂash.

4. A “PF” on the display indicates a Power Failure and

the unit requires AC power to operate. The time and

date are protected for 7 days by the super cap. The

program is retained in permanent memory.

5. A “Lo” on the display indicates that the super cap

has run low and the unit needs to be powered with AC.

A minimum of 8 hours is required to fully charge the

super cap.

6. All programs and cycles will end at 1200 a.m. on

the start of a skip day.

7. The CH1 symbol (or CH2 symbol on a two channel)

will ﬂash when in skip day/s. No operations will occur

on channel with ﬂashing symbol.