User Manual
11
screen to show OFF. DST may be activated again by
pressing DEL. Press ENTER to save changes. To change
the from the standard DST month/week/day setting
press HOUR and refer to step 4.1.
6. CYCLE MODE: To change duty cycle timing, press
either the HOUR, MIN, or SEC keys. Press ENTER to
save changes.
7. SCH MODE: To change schedule, press ENTER to
advance to desired event. Press HOUR, MIN, EVENT
to modify time settings. Press DEL to delete. Press
ENTER after each modiļ¬cation to save changes.
8. SKIP MODE: Press D/ON, D/OFF and DAY to
modify existing settings. Press ENTER to save
changes.
NOTES:
1. Unit has a look back feature. Press the EVENT key
once (or twice for two circuit units) to activate current
schedule then EVENT key again to return to the
time (run) screen. Unit will automatically pick up the last
schedule.
2. To clear date and time only and provide unit with
a soft reboot, press and release the reset button that is
recessed under the small hole to right side of LCD
screen.
3. To clear all memory, while in the RUN mode, press
ENTER, display will show:
Use the EVENT key to display: