User Manual

10
8.0 REVIEW, MODIFY AND DELETE
Press MODE to advance to any of the following
MODES:
1. AUTO MODE: In this automatic mode, the unit will
execute the scheduled programs. Time, day, seconds
and load status are displayed. C1or C2 is displayed
when Duty Cycle is programmed and operating.
OVERRIDE IN AUTO MODE: The load status of the
channel can be manually changed by pressing the
OVRD key (or OVR1 and OVR2 key for DG280A).
The unit will stay in this position until the next scheduled
event. A flashing LCD load indication (ON, OFF) shows
the status was changed by the override not a scheduled
event.
Press the OVRD (or OVR1 and OVR2 key for
DG280A) key until ON or OFF stops flashing to return
to programmed setting.
OVERRIDE IN MAN MODE: The load status of the
channel can be manually changed by pressing the
OVRD key (or OVR1 and OVR2 key for DG280A).
The unit will stay in this position until OVRD is pressed
again. A flashing LCD load indication (ON, OFF)
shows the status was changed by the override not a
scheduled event.
3. CLK MODE: To change the current time press
HOUR and MIN to modify existing settings. Press
ENTER to save changes.
4. DATE MODE: Press MONTH, DATE and YEAR to
modify existing settings. Press ENTER to save
changes. DAY is automatically adjusted.
5. DSt MODE: Factory default is set at US standard
daylight savings dates noted by ON. To remove
daylight savings time setting from, press DEL to change