User Manual

9
Example 1: The screen below shows a pattern with 3
active days and 2 skip days with today set as the first
day of skip (01 OFF).
Example 2: For the DG280A with opposite
operations, screen below shows channel 2 set for a
cycle with 2 active days and 3 skip days with today
set as the first active day (01 ON) to be opposite the
first example.
Press MODE when Skip Days are complete.
Unit is in the AUTO (automatic) mode.
The word FLASH may appear to indicate a new
program has been written to memory.
Press the EVENT key once (or twice for two circuit
units) to activate current schedule then EVENT key
again to return to AUTO mode.