Cov lus qhia

ManualsBrandsNrov nrov Engineering ManualsSilver VersionNoise Engineering Elected Silver Version

Noise Engineering

Electus Versio

Not quite a reverb, not quite a delay: the clocked

atmosphere generator you never knew you needed.

Type Stereo delay/

reverb/both?

Size 10 HP

Depth 1.5 inches

Overview

Not quite a reverb, not quite a delay, Electus is Desmodus’s more aggressive clocked

counterpart: more distortion, more in-your-face atmospheres, and synced delays for

creating your tails in a whole new way. Use it as a spacey clocked delay, as a reverb

that starts with some synced echoes, or as a completely new way to create evolving

spaces.

Not only is EV a unique atmosphere generator, it’s a stereo DSP platform. A simple USB

connection allows you to update EV to a variety of rmwares. Open-source support is

available, too, which allows you to write your own rmware! All info can be found on the

World of Versio page here.

Etymology

Electus -- from Latin: “to pass on”

Versio -- from Latin: “versatile”

“Passed Versatility”

Color code

On boot, the EV’s LEDs will shine with this color pattern to indicate that it is running the

current EV rmware:

Summary of content (7 pages)

PAGE 1
Noise Engineering Electus Versio Not quite a reverb, not quite a delay: the clocked atmosphere generator you never knew you needed. Overview Type Stereo delay/ reverb/both? Size 10 HP Depth 1.5 inches Not quite a reverb, not quite a delay, Electus is Desmodus’s more aggressive clocked counterpart: more distortion, more in-your-face atmospheres, and synced delays for creating your tails in a whole new way.
PAGE 2
Installation To power your Noise Engineering module, turn off your case. Plug one end of your ribbon cable into your power board so that the red stripe on the ribbon cable is aligned to the side that says -12v and each pin on the power header is plugged into the connector on the ribbon. Make sure no pins are overhanging the connector! If they are, unplug it and realign.
PAGE 3
Power If your Versio looks like the left picture, it requires 70mA +12v and 70mA -12v. If it looks like the right picture, it requires 125mA +12v and 10mA -12v. Versio does not use the +5v rail.
PAGE 4
A note about EV’s parameters EV’s parameters are very similar to the original Desmodus. In fact, the only parameters that perform a different function are Tap (formerly FSU) and L/C/R (formerly BND/LRP/ JMP). Additionally, in clocked mode, Size acts as a clock multiplier/divider. Interface Blend: Dry/wet balance control. When turned fully left, the unmodified input signal is passed through. Fully right, only the processed signal is heard. Points in the middle give you a mix of both.
PAGE 5
Interface (cont.) LIM/DST/SHM: Atmosphere style. • LIM (Limit): A clean atmosphere, using limiting to contain feedback. • DST (Distort): Instead of using limiting, clipping is used to limit feedback creating a more distorted tail. • SHM (Shimmer): A demonic pitch-shifting algorithm. Adds a one-octave pitch shift that feeds back into the input. L/C/R: Reflection structure: Changes how the delay lines connect with each other. In L/In R: Audio input.
PAGE 6
Patch Tutorial First patch: For your first patch, use a simple, short sound, like a pulse, snare, or click. Patch to In L, and patch Out L and R to your mixer. Set the Blend, Index, Size, and Tone controls to 12:00 to start, and start in LIM mode. To start, explore how Dense transforms your atmosphere between delay and reverb. Play with Regen to change the size of your reverb, or the number of echoes in your delay. Next, tap in a tempo by hitting the Tap button, or patch a clock to Tap.
PAGE 7
Updating Firmware Any Versio module can accept any Versio firmware. All Versio module firmwares can be updated by the user via our Customer Portal. Go to the Customer Portal to check out alternate firmwares including Desmodus, Imitor, Ampla, and many more coming soon. Transform your module into a reverb, delay, and so much more with the click of a button. Change it back whenever you like. Go to portal.noiseengineering.us To update the firmware on your Versio: 1.