Technical Specs

10
(16) POWER SAVING Test:
(A) MODE: 60kHz 1024*768(75)
(B) PATTERN: ANY PATTERN.
(C) Adjustment:
a. It should be into suspend mode when signal quit after 5 sec.2
nd
the power output must be
≦15W. Check the LED color :Orange.
b. It should be into power off mode when into suspend mode after 3sec.and the power
output must be≦8W. Check the LED color :Orange
c. Transfer the signal and check the screen is normal. Check the LED color :Green
(17) DDC 1/2B Test:
(A) MODE: Any MODE.
(B) PATTERN: Any PATTERN.
(C) Scan bar code label and apply serial NO. to EDID Data.