User's Manual

E
E-5E-4
Pincushion/ Barrel: Decreases or increases the curvature
of the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the screen
to be the same as the top.
Parallelogra m: Decreases or increases the tilt of the sides
either to the left or right.
Bow (Pincushion Bala nce): Decreases or increases the
curvature of the sides either to the left or right.
Rota tes: Rotates the image.
Dega uss: Select the degauss icon on “ Icon select window”
and push “ SELECT” button.
It will eliminate the stray magnetic field and correct the scan
of the electron beam, which affect the purity, focus and
convergence.
N ote: Allow a minimum interval of 20 minutes to elapse
between uses of the degauss function.
9300 Color Tempera ture: Select the Color Temperature icon on
“Icon Select W indow” and push “SELECT” button.
It can be switched to change the color Temperature.
(9300K, 7500K, 6500K, user)
OSD: There are 3 background colours (Blue, Black, and
white). These can be selected by “ SELECT” button after the
selection of “OSD” on ìIcon select windowî.
M oiré Ca nceler: Reduces moiré levels.
EXIT: To exit OSD window. Select EXIT on “ Icon select
window”, then push “SELECT” button.
N ote: If you do not push buttons within 10 seconds in OSD
condition, the window will automatically disappear.
Controls
OSD(On-screen Display) control buttons on the
front of the monitor function as follow s:
SELECT Enters and exits the OSD menu.
CON TROL-/ + Selects one of the controls and decreases or increases
the adjustment.
RESET Resets the highlighted control to the factory setting.
Press -/ + button at the same time for approximately 1 sec.
Brightness: Adjusts the overall image and background
screen brightness.
Contrast: Adjusts the image brightness in relation to the
background.(Contrast control is also effective with “ -,+”
button even though OSD window is not visible.)
R Red Color Control: Adjust the red contrast of the display.
G Green Color Control: Adjust the green contrast of the
display.
B Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal size
of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.