User Manual
E1 The input voltage is too high(≥260V)
The input voltage is too low(≦180V)
pan is dry cooked
this mean the IGBT high temperature
the thermal resistor of IGBT short
the thermal resistor of IGBT open
haven’t put the pan or cook dry please put the right pan on it
please replace the power board
please replace the power board
please check the fan assemble if OK.
E2
E3
E5
FA
F9
U
please check if the pan is dry cooked ,then
plug it again.If still show”E3“,may be the
sensor failure or main board failure
please check whether the power grid
voltage is normal. After the power grid
voltage is normal, restart the hob
please check whether the power grid
voltage is normal. After the power grid
voltage is normal, restart the hob