Operation Manual

NOXON
ENGLISH 37
Setting up My NOXON
My NOXON can be used immediately without registering, though with limited function. To use the full range
of function or configure the desired content, you have to activate your NOXON at the TerraTec site. This is
fast and free of charge, and takes only a few steps:
1) Go to the www.my-noxon.net website. Select the "Register now" menu item.
2) After completing the registration, go to device management menu by clicking "My NOXON".
3) There, select "My devices". You can register your NOXON here. To do so, open the "My NOXON"
menu on your NOXON. If the device is not yet registered, the "Register NOXON" menu item ap-
pears, which you should select.
4) A registration code appears on the display. Enter it on the website along with the MAC address of
your device. The MAC address of your NOXON (a 12-digit number combination separated by
dashes) is listed on the sticker on the rear side of the device or in the "Device status" menu. You
do not need to enter the dashes, just the numbers
5) Your device is now registered for use on My NOXON.
My Services of My NOXON
Subject to change without notice. The selection of services is growing
constantly.
Under My NOXON -> My Services,
you can activate or deactivate the
desired services as necessary.
Accordingly, only the desired ser-
vices are shown on the NOXON
display under My NOXON.
For more information on the ser-
vices, visit http://www.my-
noxon.net