Operation Manual

NOXON
ENGLISH 21
Open Internet Explorer, select "Internet Options" from the "Tools"
menu and select the "Connections" tab. On the bottom third of the
tab, you'll find the "LAN Settings..." button. Press the button to
open the dialogue box shown here.
If a proxy server has been activated there, use the same settings
for the NOXON.
1-3) To set up the NOXON to work with a proxy server, follow
steps 1 & 2 as described above… and in step 3 (Enable Proxy
Server Yes/No), select YES!
4) Then select "Change" ...
5) ... and enter the name ("proxy_internet") or the IP address. The
buttons you need to make an entry: the number buttons 0-9, 1
for dots, Left/Right to move the cursor, + for upper/lower case,
Up/Down to "scroll" characters, Skip back to delete a character
entered by mistake! (see chapter 3.1. et seq.) Then press the
Right button to confirm...
6) ... enter the correct port—8080 is very common—and the
proxy is set up. Again, if you have any doubts about the parame-
ters, please check with your network admin—or with the method
described above (3.).
7) Now simply select "Apply Settings", and ...
8) ...after a successful restart (and installing the software for wire-
less access to the music on your hard drive), you will be able to
access your music collection across the network—and connect to
thousands of Internet radio stations and podcasts worldwide!
Congratulations.